Contact

Publications

Find out how independent experts use our quality assurance software.

Multifaceted

Read publications in which RadCalc has been analysed, tested, compared or evaluated independently.  

Independent

Read publications in which RadCalc was used as Independent Dosimetric Verification Software to investigate scientific problems.

Powerful

Read publications in which RadCalc has been analysed, tested, compared or evaluated independently.  

White Papers and Application reports

Whitepaper on RadCalc Classic
Whitepaper on RadCalc Classic
This whitepaper explores RadCalc’s evolution, showcasing its robust features like monitor unit, time, and dose calculations; enhancing workflow efficiency and reducing errors.
Learn more
Whitepaper on RadCalc’s 3D Monte Carlo and 3D Collapse Cone algorithms
Whitepaper on RadCalc’s 3D Monte Carlo and 3D Collapse Cone algorithms
This whitepaper explores RadCalc’s 3D dose algorithms. Extensive clinical evaluations were performed to validate RadCalc’s new 3D modules’ increasing the commitment to accuracy and reliability.
Learn more
Whitepaper: RadCalc Adds Support for MR-Linacs
Whitepaper: RadCalc Adds Support for MR-Linacs
This whitepaper explores RadCalc’s addition of MR-Linac support. This additional support is part of the RadCalc Base Module and was first introduced in version 7.1.4.0 released in November of 2019.
Learn more
Woman reading whitepaper on RadCalc on a tablet
Whitepaper on the science behind RadCalc EPID
Exit-Transit Dose Reconstruction Option first developed with Dosimetry Check: The paper outlines the methodology involving the use of Electronic Portal Imaging Device (EPID) and Monte Carlo simulations to model the point spread response of EPID.
Learn more
Tablet showing parts of a RadCalc whitepaper
Whitepaper on efficient data flow in RadCalc
Unraveling the dynamics of 3D dose calculation: This document describes the communications between various RadCalc components during 3D dose computation.
Learn more
Application report: Independent QA for VMAT and SABR treatment plans with RadCalc EPID
Application report: Independent QA for VMAT and SABR treatment plans with RadCalc EPID
At Raigmore Hospital, RadCalc EPID is vital for pre-treatment and in-vivo dosimetry.
Learn more
Application report: Independent QA of Gamma Knife® Perfexion treatment planning
Application report: Independent QA of Gamma Knife® Perfexion treatment planning
The University Clinical Centre of Serbia's National Gamma Centre in Belgrade uses the RadCalc Gamma Knife module to ensure the accuracy and precision of complex SRS treatment plans.
Learn more
Application report: Ensuring safe and efficient radiotherapy with RadCalc
Application report: Ensuring safe and efficient radiotherapy with RadCalc
GenesisCare is a proudly Australianrun cancer care provider, specialising in radiation oncology with a growing footprint in medical oncology, theranostics and personalised medicine.
Learn more

Posters presented at national conferences

One-Stop-Shop for End-To-End Patient-Specific QA: A Glimpse Into the Future
One-Stop-Shop for End-To-End Patient-Specific QA: A Glimpse Into the Future
The benefits of using a suite like RadCalc extend beyond the convenience of a single integrated solution.
Learn more
Patient Specific Quality Assurance for Breast VMAT Treatment without Measurements Using RadCalc Software
Patient Specific Quality Assurance for Breast VMAT Treatment without Measurements Using RadCalc Software
In this poster, the authors validates a streamlined PSQA protocol for breast VMAT using RadCalc v7.2.3, demonstrating accurate 3D dose calculations and delivery reconstructions, meeting clinical criteria efficiently.
Learn more
Sensitivity of RadCalc EPID Dosimetry for In Vivo Composite Dose Evaluation
Sensitivity of RadCalc EPID Dosimetry for In Vivo Composite Dose Evaluation
The study is designed to test the sensitivity of the RadCalc EPID Dosimetry Suite using a heterogeneous EASY CUBE phantom in a full-body configuration from LAP.
Learn more
Feasibility of EPID Based In-Vivo Dosimetry for On-Couch Adaptive Radiotherapy
Feasibility of EPID Based In-Vivo Dosimetry for On-Couch Adaptive Radiotherapy
In-vivo EPID dosimetry of adaptive clinical plans is feasible. It was exemplary demonstrated that it reveals fractions with noticeable anatomical changes between the sCT and the patient anatomy during treatment.
Learn more
3D Geometry SDC (Second Dose Check) for Cyberknife with RayStation DICOM Export
3D Geometry SDC (Second Dose Check) for Cyberknife with RayStation DICOM Export
The study validates an accurate PSQA protocol for VMAT breast cancer using RadCalc and 3D dose reconstructions.
Learn more
Quantifying the Energy Dependent Attenuation Differences Between H2O and RW3 Solid Water...
Quantifying the Energy Dependent Attenuation Differences Between H2O and RW3 Solid Water...
This investigation demonstrates that RW3 solid water is an acceptable substitute for water measurements for EPID exit beam characterization when a water tank setup is not available.
Learn more
Sensitivity and specificity of secondary dose calculation and phantom QA for head-and-neck plans
Sensitivity and specificity of secondary dose calculation and phantom QA for head-and-neck plans
Poster presentation at ESTRO annual meeting 2023
Learn more
RadCalc Superficial Calculation: Commissioning and Comparison
RadCalc Superficial Calculation: Commissioning and Comparison
In this poster the author compares RadCalc data to hand calcs and measured data from a Xstrahl 150.
Learn more

We recommend the following publications

Evaluation of EPID-based Dose Verification System for a New Elekta LINAC: A Preliminary Study
Evaluation of EPID-based Dose Verification System for a New Elekta LINAC: A Preliminary Study
Presentation given during the 10th Japan-Korea Joint Meeting on Medical Physics on Performance evaluation of RadCalc EPID for a new Elekta Harmony Pro LINAC
Learn more
RadCalc as a calculation-based PSQA solution for online Adaptive RT with Elekta Unity MR-Linac
RadCalc as a calculation-based PSQA solution for online Adaptive RT with Elekta Unity MR-Linac
Evaluation of beam models for Elekta Unity 1.5T MR-LINAC in RadCalc
Learn more
Two academic papers on 3D Collapsed Cone and 3D Monte Carlo
Two academic papers on 3D Collapsed Cone and 3D Monte Carlo
RadCalc’s exceptional accuracy provides confidence and reliability for all field sizes in a single model with both the Collapsed Cone Superposition Convolution and BEAMnrc Monte Carlo.
Learn more
SBRT plan verification using Dosimetry Check™
SBRT plan verification using Dosimetry Check™
"EPID-based 3D dosimetry for pre-treatment FFF VMAT stereotactic body radiotherapy plan verification using Dosimetry Check™"
Learn more
RadCalc 3D algorithms to evaluate TPS dose on planning CT
RadCalc 3D algorithms to evaluate TPS dose on planning CT
"The 3D Isodose Structure based method for clinical dose distributions comparison in pretreatment patient-QA"
Learn more
Validate any treatment delivery with RadCalc EPID
Validate any treatment delivery with RadCalc EPID
A concise definition of In-vivo dosimetry in the scope of EBRT is provided in the methods section...
Learn more
Over 20 years of R&D to develop RadCalc EPID
Over 20 years of R&D to develop RadCalc EPID
"EPID‐based in-vivo dosimetry using Dosimetry Check™: Overview and clinical experience in a 5‐yr study including breast, lung, prostate, and head and neck cancer patients"
Learn more
Intelligent automation with RadCalcAIR delivers results
Intelligent automation with RadCalcAIR delivers results
With the scripting tools available in modern treatment planning systems, easy hand-offs can be built to complement RadCalcAIR's intelligent automation…
Learn more
RadCalc provides fast secondary dosimetry check in ART
RadCalc provides fast secondary dosimetry check in ART
We recommend this prospective study is the first report of daily adaptive radiotherapy (ART) for head & neck cancers…
Learn more
Using RadCalc with Elekta's Gamma Knife
Using RadCalc with Elekta's Gamma Knife
Published in the Journal of applied clinical medical physics in 2020...
Learn more
Keep up with MR-Linac second checks and other emerging technologies with RadCalc!
Keep up with MR-Linac second checks and other emerging technologies with RadCalc!
[For the plans evaluated] overall deviations were between -1.7% and +1.8% for the commissioned model, a tolerance level of 3% and an action level of 5% was...
Learn more
Study with 5936 collected and analysed fields
Study with 5936 collected and analysed fields
Released in 2018 in Physica medica...
Learn more
Four softwares compared to Philips Pinnacle3 TPS
Four softwares compared to Philips Pinnacle3 TPS
Published in Physica medica in 2018...
Learn more
Quantitative dosimetric analysis in skin brachytherapy
Quantitative dosimetric analysis in skin brachytherapy
This study aimed to investigate quantitative dosimetric analysis with independent software solutions and comprehensive treatment plan parameter evaluation for the treatment of skin cancer.
Learn more
Go to top
Enter your search term: